Hi,
I'm working on a project using jumptec pc104 boards. I use a Jumptec dual
slot isa-to-pcmcia bridge (vadem vg-469). I use a WhiteDwarf Linux but
the same problem arise with a Debian/Woody. I use the package pcmcia-cs
3.1.22 and kernel l2.4.10.
At boot time :
Linux Kernel Card Services 3.1.22
options: [pci]
Intel PCIC probe:
Vadem VG-469 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: none
host opts [1]: none
ISA irqs (scanned) = 3,4,5,7,9,10,11,12,15 status change on irq 15
cs: IO port probe 0x0c00-0x0cff: clean
cs: IO port probe 0x0800-0x08ff: clean
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean
cardmgr: starting, version is 3.1.20
cardmgr: watching 2 sockets
cardmgr: Card Services release does not match
When I plug a Avaya Silver wavelan card, supported by the orinoco driver :
cardmgr: initializing socket 1
cs: memoryprobe 0x0d0000-0x0dffff: clean.
cardmgr: socket 1: Avaya World Card
cardmgr: executing: 'modprobe hermes'
cardmgr: executing: 'modprobe orinoco'
cardmgr: executing: 'modprobe orinoco_cs'
cardmgr: executing: './network start eth1'
# ifconfig
eth1 Link encap:Ethernet HWaddr 00:02:2D:22:2B:86
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
interrupt:3 Base address:0x100
lo ...
Till here, everything seems OK, but :
# ping 192.168.1.3
PING 192.168.1.3 (192.168.1.3): 56 data bytes
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
*
*
*
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
<Ctrl-C>
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
--- 192.168.1.3 ping statistics ---
8 packets transmitted, 0 packets received, 100% packet loss
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
*
*
*
hermes @ 0x100: Card removed while waiting for command completion.
eth1: Error -19 transmitting packet
eth1: Error -16 writing packet header to BAP
eth1: Error -16 writing packet header to BAP
cardmgr: shutting down socket 1
cardmgr: executing: './network stop eth1'
cardmgr: executing: 'modprobe -r orinoco_cs'
cardmgr: executing: 'modprobe -r orinoco'
cardmgr: executing: 'modprobe -r hermes'
Same kind of problem arise when I use a D-link ethernet card
(not wavelan).
Does anybody have an idea of what's wrong ?
Thanks.
--
==========================
Julien Herfurth
Arafox SCRL
Avenue Leon Champagne, 2
1480 Tubize
Belgium
==========================
--
Subscription/unsubscription/info requests: send e-mail with subject of
"subscribe", "unsubscribe", or "info" to 
Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org
please, Please, *PLEASE* don't subscribe through a forward/false domain
From Wear-Hard Mailing list Archive (WH)
Maintained by R. Paul McCarty
Archive created with babymail