Return to the archive index

Re: Extremely good news: Kopin 320M Display Drivers

I have the Motorola ASICs in front of me. I can handle Chuck's and Justin's
requests Brian. Chuck and Justin, please send me your shipping info.
Please email me at  so I'm sure to notice it apart from spam.
Anyone heard from Don on posting his material yet? I have drawn up two plausible
designs for optics, although I'm not sure if anything is missing or if it would
work. I posted the cheesy paint prog designs at
http://www.gratainc.com/hmdcovertdesign.pdf
kill-9

Quoting Brian Kuriyama <>:

> YAY! 3 CHEERS FOR KILL-9!!!!! HIP HIP HORAY! HIP HIP HORAY! HIP HIP HORAY!
> (love spamming this e-mail) lol well congratulations! you may as well be the
> 3rd *individual* at obtaining the chips ummm I was wondering if we could
> split the uh chip order/requests from this list so I can still keep the lot
> of my chips ;-)
> 
> > I was
> > basically wondering if the motorola asic will handle color ntsc and
> convert it
> > to mono itself, or if mono MUST be sent to the asic.
> Nope. I'm almost 100% certain that it can handle color ntsc because the
> TekGear M1's are based off an outdated version(i think MCQVV110) of the
> MCQVV111AFB and they will work off a regular NTSC signal.
> Anyways I highly doubt Motorola would make you build a special color to
> greyscale converter for NTSC.
> 
> Oh yeah, kill-9? did Motorola (or whoever you are getting the chips from)
> give you a tracking number??? Motorola gave me one and I can't figure out
> how to use it or what to do with it! lol
> 
> Your 15 year old gadget maker,
> Brian Kuriyama
> 
> 
> oh yes and here's the current chip list:
> 
> Chuck Knight (2-3)
> Dan Vasaru (2 wont mind if bundle w/ displays)
> Bryan Hurley (2)
> Alex (Kill-9) (could you please take half of the orders? ;-) )
> Justin (Technomage) (3)
> 
> ----- Original Message ----- 
> From: "kill-9" <>
> To: "Brian Kuriyama" <>
> Cc: <>
> Sent: Wednesday, August 13, 2003 6:08 AM
> Subject: Re: Extremely good news: Kopin 320M Display Drivers
> 
> 
> > Yeah, I had to call Motorola, they told me that distributors handle
> samples and
> > sales, and that findchips.com showed that Newark InOne has stock. Newark
> said
> > they had no stock since it was a special order, and that since they held
> no
> > stock, Motorola would have to provide samples. Motorola then says that I
> have to
> > get samples from distributors again, so I tell them Newark says they have
> none,
> > so then they call Newark for me, and have a guy call me. He called me,
> asked
> > some questions about annual usage, etc., and says they found some stock in
> Hong
> > Kong, and will submit my request for 20-40 samples. This took reopening
> the
> > service request on motorola's site many times, etc, but seems to have
> worked.
> > God knows when I will get them though. When I mentioned the mono ntsc, I
> was
> > basically wondering if the motorola asic will handle color ntsc and
> convert it
> > to mono itself, or if mono MUST be sent to the asic. If mono must be sent,
> I was
> >  wondering if generating a mono vga mode from the graphics card and then
> sending
> > that through a vga-ntsc converter would be sufficient.
> > kill-9
> >
> > Quoting Brian Kuriyama <>:
> >
> > > Hey kill-9 and Justin
> > >
> > > kill-9:
> > > >After much playing of the game, motorola might just
> > > > be sending me some samples,
> > > sooooo did you were arguing about getting some samples from motorola??
> if
> > > you did... congradulations (i just hope i get mine too)
> > >
> > > >Can
> > > > anyone point me at any info for Don Papp's connector solution?
> > > i contacted him about it (when his mail server was actually up) and he
> said
> > > he doesn't make them anymore but it shouldn't be to hard to make
> considering
> > > the specs.
> > > just look up the fpc connector for the kopin display.
> > > Flex PC, 1.86in free length, 20 conductor, 0.5mm pitch to mate with JST
> > > 20FLZ-RSM1-TB, Hirose FH12-20S-0.5SH, Molex AE-52892-2090, Molex
> > > AE-52746-2090, or equivalent connector.
> > >
> > > >Also, I know that this ASIC is designed to work with mono
> > > > ntsc, and I was planning on getting NTSC from a vga-ntsc converter, so
> > > would it
> > > > be enough to have the actual operating system on the pc end generating
> a
> > > > monochrome mode?
> > > say what????
> > >
> > > Justin:
> > >
> > > >A good addition might be a connector on the pcb for the cable to
> > > > the cyberdisplay.
> > > Flex PC, 1.86in free length, 20 conductor, 0.5mm pitch to mate with JST
> > > 20FLZ-RSM1-TB, Hirose FH12-20S-0.5SH, Molex AE-52892-2090, Molex
> > > AE-52746-2090, or equivalent connector.
> > > (runs around in room screaming "TOO MANY SMALL PADS!!!, TOO MANY SMALL
> > > PADS!!!!!") hehe i think i'd be pretty hard to create a smt footprint
> for
> > > that thingy but your welcomed to try
> > >
> > > > Note also that the board in the image kill-9 put up is jumpered for
> PAL
> > > (not
> > > > NTSC).
> > > soooo in the newer pcb you sent us is set for ntsc?
> > >
> > > > PS Brian is it too late to set aside say 3 of those ICs??
> > > not at all, you just gave us all a great pcb (if they work lol)
> > >
> > >
> > > Your 15 year old gadget maker,
> > > Brian Kuriyama
> > >
> > >
> > > oh yes and here's the current chip list:
> > >
> > > Chuck Knight (2)
> > > Dan Vasaru (2 wont mind if bundle w/ displays)
> > > Bryan Hurley (2)
> > > Alex (Kill-9) (any amount of chips [probably gonna allocate 2 unless
> you're
> > > getting them from motorola])
> > > Justin (Technomage) (3)
> > >
> > >
> > > --
> > > Subscription/unsubscription/info requests: send e-mail with subject of
> > > "subscribe", "unsubscribe", or "info" to 
> > > Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org
> > > Please, *PLEASE* don't subscribe through a forward/expander/false domain
> > >
> > >
> >
> >
> >
> >
> > --
> > Subscription/unsubscription/info requests: send e-mail with subject of
> > "subscribe", "unsubscribe", or "info" to 
> > Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org
> > Please, *PLEASE* don't subscribe through a forward/expander/false domain
> >
> 
> 
> --
> Subscription/unsubscription/info requests: send e-mail with subject of
> "subscribe", "unsubscribe", or "info" to 
> Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org
> Please, *PLEASE* don't subscribe through a forward/expander/false domain
> 
> 

--
Subscription/unsubscription/info requests: send e-mail with subject of
"subscribe", "unsubscribe", or "info" to 
Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org
Please, *PLEASE* don't subscribe through a forward/expander/false domain

From Wear-Hard Mailing list Archive (WH)
Maintained by R. Paul McCarty

Archive created with babymail