Ok I have a slight dilema with my hacked HMD. The problem I was having is that when you moved the cable the LCD would shut off or flicker. So right now the power connector plug is cut off. I plan to get a new plug at radio shack and see if I can fix it. What my problem is, is that I don't know what the wires are for. It has the following wires: black, red, orange, green, blue and grey. its probobly safe to assume the black and red are the + and - voltage. What are the other wires for? Because they all solder to the power connector one can assume they give power to somthing. The wires for the video signal and audio are seperat. so these wires are for power only. asside from + and - voltage what else is there? the HMD has a small controll box that you controll brightness, contrast, and volume with. the green and grey wires are soldered to the controll box circut board and come out the side. the rest of them go right to the main diver board the LCD's plug into. It origionaly had 2 LCD's by the way. I hope I can get this damn thing working. Jennifer Ann Pellinen PS can anyone point me to technical specs and what not on the kopin color LCD's(this what this HMD uses). I haven't realy payed much attention to the emails regarding kopin LCD's __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com -- Subscription/unsubscription/info requests: send e-mail with subject of "subscribe", "unsubscribe", or "info" toWear-Hard Mailing List Archive (searchable): http://wearables.blu.org Please, *PLEASE* don't subscribe through a forward/expander/false domain
From Wear-Hard Mailing list Archive (WH)
Maintained by R. Paul McCarty
Archive created with babymail