Re: For Sale: Xybernaut Xyberview HMD 640x480 colour VGA

From Wear-Hard Mailing list Archive (WH) Maintained by R. Paul McCarty

Hi Charles

The connectors are proprietary but they carry basic VGA signals (analog
RGB+H/Vsync) just packed in a small size package
to include power (+5v, +15v) and audio (headphone/mic).

I have the wiring schematics for the connector so getting it hooked to a VGA
is not a problem since I have the complementary
female connector that can be used on an let's say an adapter board (you
still need to supply power). Getting power could be done
from USB via a DC:DC converter IC such as LTC1872 which is pretty cheap and
available.

thanks

-pedja

----- Original Message ----- 
From: <>
To: "'Wearable Hardware Discussion List'" <>
Cc: <>
Sent: Sunday, August 01, 2004 4:13 PM
Subject: RE: For Sale: Xybernaut Xyberview HMD 640x480 colour
VGA +ANC-600 Headset + Connectors

> What are the connectors.  They look like the proprietary Xyberview
> connectors.  Is there a VGA adapter module that will allow the unit to
> be used with a standard VGA connector (15 pin).
>
> Cordially
>
> Charles Bolton
> 
>
>
>
>
> -----Original Message-----
> From:  [mailto:]
> On Behalf Of 
> Sent: Sunday, August 01, 2004 7:55 AM
> To: Wearable Hardware Discussion List
> Subject: For Sale: Xybernaut Xyberview HMD 640x480 colour
> VGA +ANC-600 Headset + Connectors
>
>
> Hi List
>
> I thought to offer this first here, before I go to eBay, knowing that
> someone here might be interested.
>
> I have TWO Xybernaut Xyberview HMDs for sale, VGA 640x480 colour, 1 lb.
> with Andrea Headset ANC-600. Both units are brand new and have never
> been used (or plugged in for that matter), so I presume they are
> operational. I just never got a chance to do anything about them and now
> that other matters are pressing me (debts) I'm forced to sell :(
>
> Also included are those pesky small and hard to find connectors, so you
> do not have to rig this or cut the connector off the cable. I'm
> conveniently including two female connectors for the board mounting and
> one male connector for the cable.
>
> Here are some photos:
>
> http://www.max3d.com/~amigo/xybernaut/xyberview1.jpg
> http://www.max3d.com/~amigo/xybernaut/xyberview2.jpg
> http://www.max3d.com/~amigo/xybernaut/xyberview3.jpg
>
> Asking price is $465 ($450+$15 PayPal fee) *each* and includes packaging
> and shipping anywhere in USA and Canada (I'm in Canada). If you live
> outside of North America I expect you to cover the difference in
> shipping to your country. I'll accept PayPal and will ship UPS or Fedex,
> or other carrier of your choice such as USPS as long as you understand
> that if we do not use UPS/Fedex you are responsible if the package gets
> lost (not saying it would but I don't trust postal service).
>
> Thank you for your attention,
>
> -pedja
> 
>
>
>
> _______________________________________________
> Wear-Hard mailing list
>  http://www.haven.org/mailman/listinfo/wear-hard
>
>

_______________________________________________
Wear-Hard mailing list

http://www.haven.org/mailman/listinfo/wear-hard