Hello DLP, The DT166's mainboard is like the nano-itx people are waiting for with a low voltage CPU, the via 533 you were talking about. Here are a copy of a precedent post and answer about that : ---- >Hi all > >I finally buy it and started a review for a website friends and I are >about to open... (We hope you'll love the mascott we made... ) > >Here is a "preview" of the "review" : > http://www.wearablecomputers.org/dt166.htm >enjoy :) >--------- > >Same product informations about the model without IDE : http://www.amd.com/us-en/assets/content_type/DownloadableAssets/31754A_gxthinclientrdk_pb.pdf http://www.dtri.com/prod_webDT166CE.html http://www.dtresearch.com/datasheets/WebDT%20166.pdf DT>> German mini PC http://www.linuxdevices.com/news/NS5147900390.html DT>> A German PC shop is shipping a tiny Geode-based PC available with a DT>> choice of Linux operating systems. DT>> Concept Distribution's "miniPC" measures 5.5 x 5.1 x 1.4 inches (13 x 14 DT>> x 3.5cm), and is available with thin-client and DT>> general-purpose Linux OSes. http://www.cool-shop.de/product_info.php?products_id=54&cPath=5&XTCsid=a14057f2f86025c3d92f78a3eec241d3 DT>> small minicomputer also before-installed operating system Windows XP DT>> Professional SP2 DT>> * Processor: AMD geode GX2-533 (400 MHz), comparably with 533 MHz DT>> Pentium DT>> * 256 MB RAM (not expandable) DT>> * Non removable disk 80 GB DT>> * Front side: 2 x USB 1,1, stereo in/out DT>> * Back side: 2 x USB 1,1, network, 12V, VGA DT>> * Realtek sound (18-bit full-duplex) ALC203 DT>> * Realtek Ethernet (100 Mbps) RTL8139DL DT>> * Size: 13x14x3,5cm DT>> * external mini power pack (like mobile phone-charger) DT>> this extremely currentsaving (approx. 2-6 W), light (550g) PC Wednesday, August 3, 2005, 11:48:02 PM, you wrote: D> Another alternative to the U50 besides PC104 may be the Mini-ITX and D> Nano-ITX form factor boards. There is a Frequently Asked Questions D> available at http://mini-itx.com/faq.asp D> Among the many numerous designs that comply with Mini-ITX, there are D> some very interesting and highly power efficient boards that start D> with processors @ 533Mhz and go up to around 1Ghz and higher. The D> boards Im speaking of are made by VIA but there are some other D> manufacturers who produce competitive designs with comparable D> features. D> These things usually have onboard SVGA 1024x768 24-bit color, AC97 or D> better audio, USB (commonly USB 2.0 now), IDE(usually 2 devices able D> to connect to the controller), and some sort of serial or parallel D> port. D> The REALLY exciting form factor that is not retailling yet (I think D> it's sometime this year) is the Nano-ITX form factor. These boards are D> 12 centimeters by 12 centimeters and come with some surprisingly D> modern multimedia features including USB, IDE, stereo audio, SVGA, and D> at the same time probably have very good power efficiency. D> There are so many boards available now that fit into the mini-ITX form D> factor that you should be able to find something just right for your D> application. But, if nothing really captures your attention you could D> look into hacking something together from a laptop in the subnotebook D> category. I know that alot of people here have used Libretto notebooks D> before. D> Also consider this place, www.cappuccinopc.com - they manufacturered a D> very small computer they called the Espresso PC. It was about the size D> of a PalmPC and it had a touchpad mouse, VGA out, USB, and a D> harddrive. I think it sucked power like a horse does water though and D> it was discontinued after a couple of years. They still make and sell D> a number of small computers though. D> Take a peek at the Archos, I don't think it will run Windows though. D> This doesn't bother most people running Linux on them ;-) D> http://archosfans.com/ D> You may find Ralf Ackerman's site helpful as well. D> http://www.iptel-now.de/HOWTO/WEAR_TOP/wear_top.html D> And then there's always wearables.blu.org with the page D> http://wearables.blu.org/hardwear.html D> I am not sure if it's kept up though. D> If I had to answer definitively, I would have to say pick a mini-ITX D> or nano-ITX as they are very affordable but are also very capable in D> features and processor power. D> One thing to consider though is whether you desire to make your own D> power system for this computer or whether you'd prefer to leave it to D> something already assembled like the U50 or subnotebook will. This is D> not an impossible undertaking for the beginner, but it does require D> some research and patience to build one that is right for you. There D> are some very good resources on batteries in the list archive at D> wearables.blu.org and on the site itself. Good luck on your project, I D> hope you can find something that fits your requirements. D> On Tue, 26 Jul 2005 09:11:21,<
> wrote: >> >> I want to build a wearable. I want the device to be at least 400mhz, 256mb ram, >> have a HARD DRIVE, vga-out capable of 800x600 24-bit, and be able to run windows >> 2000/xp. Those requirements pretty much stick me with a sony vaio u50 as my most >> cost effective core. I have been looking into PC104 setups, but nobody lists any >> prices. Does anyone know the parts and costs of building a comparable system out >> of pc104 parts? (include battery/power supply interface). Otherwise im looking at >> $1100 for a u50 (ebay). Anything else out there that can fulfill my requirements >> that I dont know about? >> >> ---- Msg sent via CWNet - http://www.cwnet.com/ >> >> _______________________________________________ >> Wear-Hard mailing list >>
>> http://www.haven.org/mailman/listinfo/wear-hard >> D> _______________________________________________ D> Wear-Hard mailing list D>
D> http://www.haven.org/mailman/listinfo/wear-hard -- Best regards, leboa mailto:
_______________________________________________ Wear-Hard mailing list
http://www.haven.org/mailman/listinfo/wear-hard
From Wear-Hard Mailing list Archive (WH)
Maintained by R. Paul McCarty
Archive created with babymail