this might be a common ground problem, try connecting the GND line of teh PSU and the GND line on the parvus board together.. I've know this to cause weird problems before.. neill Cowgirl the MindWalker wrote: > > Ok... I don't know if this is of topic, but I'm feeling really dumb > right now. I just got a new Parvus Scalable 1 board and DOC to build a > second wearable... But for the life of me I can't remember how I got the > darn thing to work with a floppy and HD. <I know.. dumb> > > I normally just work off the DOC and a ATA PC Card drive. I still have > my old HD I used a year ago to install my first wearable but can't get it > to work. > > I should just be able to leave the HD and floppy in my desktop PC, leave > the power hooked up and attach the data cables to the parvus right? Power > up the desktop fully... then power up the parvus. I try that and nothing > happens. > > The only thing I can think of is that the board is bad... as I can't > seem to even get a standard VGA display to work. <AHHHH> > > Any help would be soooo welcome.... :) > > -Cowgirl > AKA > The dumb blond who codes and hates hardware! > > -- > Subcription/unsubscription/info requests: send e-mail with subject of > "subscribe", "unsubscribe", or "info" to> Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org -- ---------------------------------------------------------------------- Neill Newman Tel: Mobile 07970 673722 Department of Electronics Systems Engineering Work 01206 873708 University of Essex Fax: Work 01206 872900 http://wearables.essex.ac.uk/index.html email:
---------------------------------------------------------------------- -- Subcription/unsubscription/info requests: send e-mail with subject of "subscribe", "unsubscribe", or "info" to
From Wear-Hard Mailing list Archive (WH)
Maintained by R. Paul McCarty
Archive created with babymail