Return to the archive index

Ok... now I feel dumb.

>>>>> "Cowgirl" == Cowgirl the MindWalker <> writes:

Cowgirl>   I should just be able to leave the HD and floppy in my
Cowgirl> desktop PC, leave the power hooked up and attach the data
Cowgirl> cables to the parvus right?  Power up the desktop
Cowgirl> fully... then power up the parvus.  I try that and nothing
Cowgirl> happens.

What you described doing does work for me.

A few things to check:

Be *sure* you have the cables in their correct orientation.  I have on
occation plugged them in backwards (on the drives, not the parvis
board as the drives are not always keyed).

Is the board getting power?  (Confirm by seeing if there is power on
the  board, test at j22 (rev C or rev D scalable I)

What card is in the scalable I?  Could it be defaulting to LCD output
only?

Is the card seated in fully?

Is there a blown fuse on your power board (silly, but it can happen)

If I recal you use a chip in your U8 socket, are the jumpers(j20) set
correctly to handle that? Is the chip in correctly and fully seated? 

Tell me more and perhaps I can help (I am also a scalable I user).

Greg
--
 Greg Priest-Dorman
       NO SOLICITING

--
Subcription/unsubscription/info requests: send e-mail with subject of
"subscribe", "unsubscribe", or "info" to 
Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org

From Wear-Hard Mailing list Archive (WH)
Maintained by R. Paul McCarty

Archive created with babymail